MOBIL BRAKE FLUID DOT 4 – 500 ML
- Reviews (0)
- Add a review
Shell Helix HX5 20W-50 – 4L PACK
Shell Helix HX7 10W-40 – 4L PACK
Caltex CX Havoline Xtended Life Inhibitor Pre-Mixed Coolant (510548)
Our Address Baridhara, Dhaka, Bangladesh
Contact Us email@example.com
Call Us +880 1673-717786
Product Name: Mobil Brake Fluid
Item Weight: 500 ml
Oil Type: Brake Fluid Dot 4
Density at 20°C: 1.048 g/cm3
Equilibrium Reflux Boiling Point: 265 °C
Wet Equilibrium Reflux Boiling Point: 160 °C
pH value (50% EtOH): 9.1
Viscosity at -40°C: 1300 cst
Viscosity Rating: FMVSS 116 DOT 4; FMVSS 116 DOT 3; SAE J1704; ISO 4925 (Classes 3 & 4)
Typical wet Boiling Point: 239 c
Vehicle Type: Passenger and Heavy Vehicle
Mobil Brake Fluid DOT 4 is based on polyethylene glycol ether technology to provide the highest level of brake and clutch performance in modern as well as older model automotive and commercial vehicles. Key features and benefits include:
-High boiling point
-Minimum rubber component swell
-Excellent corrosion protection
Advantages and Potential Benefits
-Consistent and safe brake performance under severe braking pressure
-Reduces leakage and loss of fluid to a minimum
-Extended life and reliability of brake system components
Mobil Brake Fluid DOT 4 is recommended by ExxonMobil for use in applications requiring disc, drum and anti-skid braking systems used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. Recommendations for use include:
Use only in its concentrated form out of a previously unopened or well sealed container
Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly.
Never reuse drained brake fluid.
Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing.
Brake fluid should be drained from the vehicle every two years or 40,000 Km (24,000 Miles) and refilled.
Check Owners Operators Manual for details.